深圳立昂微檢測有限公司
照明產品新ErP及能效標簽法規修正
2021年2月26日，歐盟官方發布了 (EU) 2021/341 和 (EU) 2021/340 兩條新指令，其中分別針對原指令 (EU) 2019/2020 光源和*立式控制裝置生態設計要求和 (EU) 2019/2015 光源能效標簽要求做了相應的修正，為新版ERP發布以來*次重大*新。On February 26, 2021, the European Commission issued two new directives (EU) 2021/341 and (EU) 2021/340, which respectively address the original directive (EU) 2019/2020 light source and separate control gears ecological design requirements and (EU) The 2019/2015 energy labelling requirements for light sources have been revised accordingly, which is the first major update since the release of the new version of ERP.
新指令(EU) 2021/341修正New directives (EU) 2021/341 revised
1、 新增條款：如果在2021-07-01之前，市場上未投放相同產品，那么在2021-07-01至2021-08-31之間，滿足新版ERP指令 (EU) 2019/2020要求的產品，視為滿足舊版ERP指令 (EC) No 244/2009，(EC) No 245/2009及 (EU) No 1194/2012的要求。If no unit belonging to the same model or equivalent models was placed on the market before 1 July 2021, the units of models placed on the market between 1 July 2021 and 31 August 2021 which comply with the provisions of this regulation shall be considered compliant with the requirements of Commission Regulations (EC) No 244/2009, (EC) No 245/2009 and (EU) No 1194/2012.’;
2、 新增條款：針對已投放市場的產品，對硬件及軟件升級做了相應的管控。For the products that have been placed on the market, the hardware and firmware upgrades have been controlled accordingly.
- 任何硬件和軟件升級不得降低產品的能效The energy consumption of the product and any of the other declared parameters shall not deteriorate after a software or firmware update
- 任何軟件升級需保證產品仍符合ERP指令要求Any software update shall ensure that the product still meets the requirements of the ERP directive
- 拒絕軟件升級不得影響產品原有性能A software update shall never have the effect of changing the product's performance
3、 對原有豁免產品進行修正; Revise the original exempted products;
4、 對部分產品測試要求做了變更：用于 冰箱、洗碗機、洗衣機/洗干一體機、 烘干機內的光源，將不再需要滿足ANNEX II中光通量維持率，存活率的要求；外包裝及技術文件內不再需要體現壽命，光通量維持因數，存活因數等信息。Light sources specifically designed and exclusively marketed for use in products in the scope of Commission Regulations 2019/2023, 2019/2022, 932/2012 and 2019/2019, shall be exempt from the requirements regarding lumen maintenance factor and survival factor
5、 Annex II 修改如下：Annex II is amended as follows:
修訂前：
SVM≤0.4
除了有效光通量大于4klm的HID，或者用于室外環境，工業環境或其余環境當光源標準允許顯色指數小于80
修訂后：
SVM≤0.9
SVM≤0.4 (2024年9月1日后)
除了有效光通量大于4klm的HID，或者用于室外環境，工業環境或其余環境當光源標準允許顯色指數小于80
新指令(EU) 2021/340修正New directives (EU) 2021/340 revised
1、 修正原版效等級標簽尺寸錯誤revised label size
標準標簽尺寸由“至少36mm x 75mm ”修正為至少“36mm x 72mm” for the standard-sized label, at least 36 mm wide and 72 mm high
小標簽尺寸for the small-sized label (width less than 36 mm), at least 20 mm wide and 54 mm high
- 新增了對能效等級標簽邊框的要求the rectangular border of the label and the internal dividers shall have a weight of 0,5 pt and the colour shall be 100 % black’;
1、 注冊信息變更Registration information revision：
- 新增燈頭 / 連接端口類型 Added Light source cap-type (or other electric interface)
- 能源消耗數值（kWh/1000h）改為向上取整Energy consumption in on-mode (kWh/1 000 h), rounded up to the nearest integer
- 對色溫的錄入格式做了調整Adjusting Input Format for CCT
2、 技術文件內新增信息Added information in technical document ：
- 定向燈峰值光強Peak luminous intensity in cd for directional light sources
- LED和OLED產品R9數值R9 colour rendering index value for LED and OLED light sources
- LED和OLED產品存活因數Survival factor for LED and OLED light sources;
- LED和OLED產品光通量維持因數Lumen maintenance factor for LED and OLED light sources
- LED和OLED產品宣稱壽命（L70B50）Indicative lifetime L70B50 for LED and OLED light sources
3、 市場抽查要求變更Market surveillance requirement revision ：
- 若PST短期閃爍指數及SVM頻閃效應的宣稱值小于等于1.0，驗證公差范圍從“實測值不*過宣稱值10%”改為“實測值不*過宣稱值+0.1”
- 移除針對FL和HID存活率及光通量維持率的要求Removed requirements for FL and HID Survival factor and Lumen maintenance factor
